Foliohouse

Vox AC4TV Guitar Tube Amp Review – George’s Music

Different Types of Guitar Amps

Once you have selected your guitar, you require finding an amp to go with it. Today there are various options available depending on size, sound, amplifier technology and configuration. We are here to give you some useful and necessary information that would steer you through the maze.

Various types of Amplifiers

There are basically four types of guitar amplifiers: Solid-state (analog), Tube, Modeling (digital), and Hybrids.

Solid-state Amps – These guitar amps are recognized solid-state as they use transistors for their preamp and for power sections as an alternative of tubes. They are extremely trustworthy and hardly ever require repairs. They normally have a very fresh tone, even though many come with “distortion” channels also. These amps are all the rage with players looking for a strong, dependable touring amp.

Tube Amps – Tube amps are favored by many guitarists for their tepid, fat tone and as well for the “organic” distortion. Tube amps are generally sound louder than solid-state amps of the same wattage and have an exact “feel”, which you do not acquire from solid-state amps. Most tube amps have different channels, which could be switched from clean to distorted tones instantly. Tube performance could also be deteriorating over time, so tubes require changing occasionally.

Modeling Amps (Digital Amps) – Modeling amp uses digital processors to reproduce the sound of traditional and contemporary tube technology. Using software that “models” the sound of tube amplifiers (and cabinets); these amps put the sound of various amps in one box. Modeling amps are programmable, and frequently have fitted digital effects like delay, chorus, etc. Some as well comprise of digital or even for analog outputs with orator simulation for going direct in to a recording border or P A system.

Hybrid Amps – Combining the best of each kind of guitar amp into one package, these amps use a real tube in combination with the solid state power part of their amps. Marshall Valve state amps use tubes in the preamp part and solid state circuitry in the power section to make a tube tone with no necessity the use of power tubes.

About the Author

Rocky is a Copywriter of
digital music recording

He has written many articles in various topics.For more information visit:For more information visit:
Ableton

Will using a tube amp head (6505+) with my Kustom Quad Jr Stack Cabinet work?

I understand that there are no tube cabinets only tube amp heads, but because the Quad Jr stack is from a solid state combo, will it work if I ran a Peavey 6505+ through it?

If so, can I expect good metal distortion from this combo?

A “cabinet” is just a wood box with speakers in it. What matters is the speakers and how they’re wired together. Check on the back of the cabinet — there should be a sticker/plate or something listing the OHM value Ω. It’s typical to have 4Ω or 8Ω. This is a technical term that tells you how much resistance to electrical current the speakers have.

Your tube head should have the Ohms listed for its outputs too. Some have multiple speaker outs with 4Ω, 8Ω, or 16Ω. For your gear to work properly, you need to match up the head and cabinet. Both need to have the same Ohm value.

Also double-check the wattage rating of your speakers, so you don’t just smoke ‘em as soon as you crank up.

As for “metal” distortion, that’s a hard thing to put your finger on. Whatever distortion pedal you have is a big part of this, plus the guitar pickups and EQ settings — speakers are at the END of the chain. Every dude has his own settings, and just because you don’t sound like _____________ doesn’t mean you suck. You do what you like, and *%#% the haters!